9-I/O · guava · 看云

# 9-I/O # 9-I/O [原文鏈接](http://code.google.com/p/guava-libraries/wiki/IOExplained) [譯文鏈接](http://ifeve.com/google-guava-io) **譯者：**沈義揚 ## 字節流和字符流 Guava使用術語”流” 來表示可關閉的，并且在底層資源中有位置狀態的I/O數據流。術語”字節流”指的是InputStream或OutputStream，”字符流”指的是Reader 或Writer（雖然他們的接口Readable 和Appendable被更多地用于方法參數）。相應的工具方法分別在[`ByteStreams`](http://docs.guava-libraries.googlecode.com/git-history/release/javadoc/com/google/common/io/ByteStreams.html) 和[`CharStreams`](http://docs.guava-libraries.googlecode.com/git-history/release/javadoc/com/google/common/io/CharStreams.html)中。大多數Guava流工具一次處理一個完整的流，并且/或者為了效率自己處理緩沖。還要注意到，接受流為參數的Guava方法不會關閉這個流：關閉流的職責通常屬于打開流的代碼塊。其中的一些工具方法列舉如下： **ByteStreams****CharStreams**[`byte[] toByteArray(InputStream)`](http://docs.guava-libraries.googlecode.com/git-history/release/javadoc/com/google/common/io/ByteStreams.html#toByteArray%28java.io.InputStream%29)[`String toString(Readable)`](http://docs.guava-libraries.googlecode.com/git-history/release/javadoc/com/google/common/io/CharStreams.html#toString%28java.lang.Readable%29)N/A[`List<String> readLines(Readable)`](http://docs.guava-libraries.googlecode.com/git/javadoc/com/google/common/io/CharStreams.html#readLines%28java.lang.Readable%29)[`long copy(InputStream, OutputStream)`](http://docs.guava-libraries.googlecode.com/git-history/release/javadoc/com/google/common/io/ByteStreams.html#copy%28java.io.InputStream,%20java.io.OutputStream%29)[`long copy(Readable, Appendable)`](http://docs.guava-libraries.googlecode.com/git-history/release/javadoc/com/google/common/io/CharStreams.html#copy%28java.lang.Readable,%20java.lang.Appendable%29)[`void readFully(InputStream, byte[])`](http://docs.guava-libraries.googlecode.com/git-history/release/javadoc/com/google/common/io/ByteStreams.html#readFully%28java.io.InputStream,%20byte%5B%5D%29)N/A[`void skipFully(InputStream, long)`](http://docs.guava-libraries.googlecode.com/git/javadoc/com/google/common/io/ByteStreams.html#skipFully%28java.io.InputStream,%20long%29)[`void skipFully(Reader, long)`](http://docs.guava-libraries.googlecode.com/git/javadoc/com/google/common/io/CharStreams.html#skipFully%28java.io.Reader,%20long%29)[`OutputStream nullOutputStream()`](http://docs.guava-libraries.googlecode.com/git/javadoc/com/google/common/io/ByteStreams.html#nullOutputStream%28%29)[`Writer nullWriter()`](http://docs.guava-libraries.googlecode.com/git/javadoc/com/google/common/io/CharStreams.html#nullWriter%28%29)**關于InputSupplier 和OutputSupplier要注意：** 在ByteStreams、CharStreams以及com.google.common.io包中的一些其他類中，某些方法仍然在使用InputSupplier和OutputSupplier接口。這兩個借口和相關的方法是不推薦使用的：它們已經被下面描述的source和sink類型取代了，并且最終會被移除。 ## 源與匯通常我們都會創建I/O工具方法，這樣可以避免在做基礎運算時總是直接和流打交道。例如，Guava有Files.toByteArray(File) 和Files.write(File, byte\[\])。然而，流工具方法的創建經常最終導致散落各處的相似方法，每個方法讀取不同類型的源或寫入不同類型的匯\[sink\]。例如，Guava中的Resources.toByteArray(URL)和Files.toByteArray(File)做了同樣的事情，只不過數據源一個是URL，一個是文件。為了解決這個問題，Guava有一系列關于源與匯的抽象。源或匯指某個你知道如何從中打開流的資源，比如File或URL。源是可讀的，匯是可寫的。此外，源與匯按照字節和字符劃分類型。 **字節****字符****讀**[`ByteSource`](http://docs.guava-libraries.googlecode.com/git-history/release/javadoc/com/google/common/io/ByteSource.html)[`CharSource`](http://docs.guava-libraries.googlecode.com/git-history/release/javadoc/com/google/common/io/CharSource.html)**寫**[`ByteSink`](http://docs.guava-libraries.googlecode.com/git-history/release/javadoc/com/google/common/io/ByteSink.html)[`CharSink`](http://docs.guava-libraries.googlecode.com/git-history/release/javadoc/com/google/common/io/CharSink.html)源與匯API的好處是它們提供了通用的一組操作。比如，一旦你把數據源包裝成了ByteSource，無論它原先的類型是什么，你都得到了一組按字節操作的方法。 ### 創建源與匯 Guava提供了若干源與匯的實現： **字節****字符**[`Files.asByteSource(File)`](http://docs.guava-libraries.googlecode.com/git/javadoc/com/google/common/io/Files.html#asByteSource%28java.io.File%29)[`Files.asCharSource(File, Charset)`](http://docs.guava-libraries.googlecode.com/git/javadoc/com/google/common/io/Files.html#asCharSource%28java.io.File,%20java.nio.charset.Charset%29)[`Files.asByteSink(File, FileWriteMode...)`](http://docs.guava-libraries.googlecode.com/git/javadoc/com/google/common/io/Files.html#asByteSink%28java.io.File,%20com.google.common.io.FileWriteMode...%29)[`Files.asCharSink(File, Charset, FileWriteMode...)`](http://docs.guava-libraries.googlecode.com/git/javadoc/com/google/common/io/Files.html#asCharSink%28java.io.File,%20java.nio.charset.Charset,%20com.google.common.io.FileWriteMode...%29)[`Resources.asByteSource(URL)`](http://docs.guava-libraries.googlecode.com/git/javadoc/com/google/common/io/Resources.html#asByteSource%28java.net.URL%29)[`Resources.asCharSource(URL, Charset)`](http://docs.guava-libraries.googlecode.com/git/javadoc/com/google/common/io/Resources.html#asCharSource%28java.net.URL,%20java.nio.charset.Charset%29)[`ByteSource.wrap(byte[])`](http://docs.guava-libraries.googlecode.com/git/javadoc/com/google/common/io/ByteSource.html#wrap%28byte%5B%5D%29)[`CharSource.wrap(CharSequence)`](http://docs.guava-libraries.googlecode.com/git/javadoc/com/google/common/io/CharSource.html#wrap%28java.lang.CharSequence%29)[`ByteSource.concat(ByteSource...)`](http://docs.guava-libraries.googlecode.com/git/javadoc/com/google/common/io/ByteSource.html#concat%28com.google.common.io.ByteSource...%29)[`CharSource.concat(CharSource...)`](http://docs.guava-libraries.googlecode.com/git/javadoc/com/google/common/io/CharSource.html#concat%28com.google.common.io.CharSource...%29)[`ByteSource.slice(long, long)`](http://docs.guava-libraries.googlecode.com/git/javadoc/com/google/common/io/ByteSource.html#slice%28long,%20long%29)N/AN/A[`ByteSource.asCharSource(Charset)`](http://docs.guava-libraries.googlecode.com/git/javadoc/com/google/common/io/ByteSource.html#asCharSource%28java.nio.charset.Charset%29)N/A[`ByteSink.asCharSink(Charset)`](http://docs.guava-libraries.googlecode.com/git/javadoc/com/google/common/io/ByteSink.html#asCharSink%28java.nio.charset.Charset%29)此外，你也可以繼承這些類，以創建新的實現。注：把已經打開的流（比如InputStream）包裝為源或匯聽起來是很有誘惑力的，但是應該避免這樣做。源與匯的實現應該在每次openStream()方法被調用時都創建一個新的流。始終創建新的流可以讓源或匯管理流的整個生命周期，并且讓多次調用openStream()返回的流都是可用的。此外，如果你在創建源或匯之前創建了流，你不得不在異常的時候自己保證關閉流，這壓根就違背了發揮源與匯API優點的初衷。 ### 使用源與匯一旦有了源與匯的實例，就可以進行若干讀寫操作。 **通用操作** 所有源與匯都有一些方法用于打開新的流用于讀或寫。默認情況下，其他源與匯操作都是先用這些方法打開流，然后做一些讀或寫，最后保證流被正確地關閉了。這些方法列舉如下： - openStream()：根據源與匯的類型，返回InputStream、OutputStream、Reader或者Writer。 - openBufferedStream()：根據源與匯的類型，返回InputStream、OutputStream、BufferedReader或者BufferedWriter。返回的流保證在必要情況下做了緩沖。例如，從字節數組讀數據的源就沒有必要再在內存中作緩沖，這就是為什么該方法針對字節源不返回BufferedInputStream。字符源屬于例外情況，它一定返回BufferedReader，因為BufferedReader中才有readLine()方法。 **源操作** **字節源****字符源**[`byte[] read()`](http://docs.guava-libraries.googlecode.com/git/javadoc/com/google/common/io/ByteSource.html#read%28%29)[`String read()`](http://docs.guava-libraries.googlecode.com/git/javadoc/com/google/common/io/CharSource.html#read%28%29)N/A[`ImmutableList<String> readLines()`](http://docs.guava-libraries.googlecode.com/git/javadoc/com/google/common/io/CharSource.html#readLines%28%29)N/A[`String readFirstLine()`](http://docs.guava-libraries.googlecode.com/git/javadoc/com/google/common/io/CharSource.html#readFirstLine%28%29)[`long copyTo(ByteSink)`](http://docs.guava-libraries.googlecode.com/git/javadoc/com/google/common/io/ByteSource.html#copyTo%28com.google.common.io.ByteSink%29)[`long copyTo(CharSink)`](http://docs.guava-libraries.googlecode.com/git/javadoc/com/google/common/io/CharSource.html#copyTo%28com.google.common.io.CharSink%29)[`long copyTo(OutputStream)`](http://docs.guava-libraries.googlecode.com/git/javadoc/com/google/common/io/ByteSource.html#copyTo%28java.io.OutputStream%29)[`long copyTo(Appendable)` ](http://docs.guava-libraries.googlecode.com/git/javadoc/com/google/common/io/CharSource.html#copyTo%28java.lang.Appendable%29)[`long size()`](http://docs.guava-libraries.googlecode.com/git/javadoc/com/google/common/io/ByteSource.html#size%28%29) (in bytes)N/A[`boolean isEmpty()`](http://docs.guava-libraries.googlecode.com/git/javadoc/com/google/common/io/ByteSource.html#isEmpty%28%29)[`boolean isEmpty()`](http://docs.guava-libraries.googlecode.com/git/javadoc/com/google/common/io/CharSource.html#isEmpty%28%29)[`boolean contentEquals(ByteSource)`](http://docs.guava-libraries.googlecode.com/git/javadoc/com/google/common/io/ByteSource.html#contentEquals%28com.google.common.io.ByteSource%29)N/A[`HashCode hash(HashFunction)`](http://docs.guava-libraries.googlecode.com/git/javadoc/com/google/common/io/ByteSource.html#hash%28com.google.common.hash.HashFunction%29)N/A匯操作 **字節匯****字符匯**[`void write(byte[])`](http://docs.guava-libraries.googlecode.com/git/javadoc/com/google/common/io/ByteSink.html#write%28byte%5B%5D%29)[`void write(CharSequence)`](http://docs.guava-libraries.googlecode.com/git/javadoc/com/google/common/io/CharSink.html#write%28java.lang.CharSequence%29)[`long writeFrom(InputStream)`](http://docs.guava-libraries.googlecode.com/git/javadoc/com/google/common/io/ByteSink.html#writeFrom%28java.io.InputStream%29)[`long writeFrom(Readable)`](http://docs.guava-libraries.googlecode.com/git/javadoc/com/google/common/io/CharSink.html#writeFrom%28java.lang.Readable%29)N/A[`void writeLines(Iterable<? extends CharSequence>)`](http://docs.guava-libraries.googlecode.com/git/javadoc/com/google/common/io/CharSink.html#writeLines%28java.lang.Iterable%29)N/A[`void writeLines(Iterable<? extends CharSequence>, String)`](http://docs.guava-libraries.googlecode.com/git/javadoc/com/google/common/io/CharSink.html#writeLines%28java.lang.Iterable,%20java.lang.String%29)### 范例 ``` <pre class="calibre11">``` //Read the lines of a UTF-8 text file ImmutableList<String> lines = Files.asCharSource(file, Charsets.UTF_8).readLines(); //Count distinct word occurrences in a file Multiset<String> wordOccurrences = HashMultiset.create( Splitter.on(CharMatcher.WHITESPACE) .trimResults() .omitEmptyStrings() .split(Files.asCharSource(file, Charsets.UTF_8).read())); //SHA-1 a file HashCode hash = Files.asByteSource(file).hash(Hashing.sha1()); //Copy the data from a URL to a file Resources.asByteSource(url).copyTo(Files.asByteSink(file)); ``` ``` ## 文件操作除了創建文件源和文件的方法，Files類還包含了若干你可能感興趣的便利方法。 [`createParentDirs(File)`](http://docs.guava-libraries.googlecode.com/git-history/release/javadoc/com/google/common/io/Files.html#createParentDirs%28java.io.File%29)必要時為文件創建父目錄[`getFileExtension(String)`](http://docs.guava-libraries.googlecode.com/git-history/release/javadoc/com/google/common/io/Files.html#getFileExtension%28java.lang.String%29)返回給定路徑所表示文件的擴展名[`getNameWithoutExtension(String)`](http://docs.guava-libraries.googlecode.com/git/javadoc/com/google/common/io/Files.html#getNameWithoutExtension%28java.lang.String%29)返回去除了擴展名的文件名[`simplifyPath(String)`](http://docs.guava-libraries.googlecode.com/git-history/release/javadoc/com/google/common/io/Files.html#simplifyPath%28java.lang.String%29)規范文件路徑，并不總是與文件系統一致，請仔細測試[`fileTreeTraverser()`](http://docs.guava-libraries.googlecode.com/git/javadoc/com/google/common/io/Files.html#fileTreeTraverser%28%29)返回TreeTraverser用于遍歷文件樹