CentOS7.x系統根目錄分區擴容 · 個人筆記

step1. 查看現有磁盤信息，可以看出根分區有45G ~~~ [root@DEV-CMDB-DB02 ~]# df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/centos_mb--centos7-root 45G 9.8G 35G 23% / devtmpfs 5.9G 0 5.9G 0% /dev tmpfs 5.9G 84K 5.9G 1% /dev/shm tmpfs 5.9G 8.9M 5.9G 1% /run tmpfs 5.9G 0 5.9G 0% /sys/fs/cgroup /dev/sda1 497M 142M 356M 29% /boot tmpfs 1.2G 16K 1.2G 1% /run/user/42 tmpfs 1.2G 0 1.2G 0% /run/user/0 ~~~ step2. 查看新增加的磁盤信息 ~~~ [root@DEV-CMDB-DB02 ~]# fdisk -l Disk /dev/sda: 53.7 GB, 53687091200 bytes, 104857600 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk label type: dos Disk identifier: 0x000e0945 Device Boot Start End Blocks Id System /dev/sda1 * 2048 1026047 512000 83 Linux /dev/sda2 1026048 104857599 51915776 8e Linux LVM Disk /dev/sdb: 107.4 GB, 107374182400 bytes, 209715200 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes ~~~ step3. 根據以上信息，對新增加的磁盤進行分區 ~~~ [root@DEV-CMDB-DB02 ~]# fdisk /dev/sdb Welcome to fdisk (util-linux 2.23.2). Changes will remain in memory only, until you decide to write them. Be careful before using the write command. Device does not contain a recognized partition table Building a new DOS disklabel with disk identifier 0x232defba. Command (m for help): p Disk /dev/sdb: 107.4 GB, 107374182400 bytes, 209715200 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk label type: dos Disk identifier: 0x232defba Device Boot Start End Blocks Id System Command (m for help): n Partition type: p primary (0 primary, 0 extended, 4 free) e extended Select (default p): p Partition number (1-4, default 1): 1 First sector (2048-209715199, default 2048): Using default value 2048 Last sector, +sectors or +size{K,M,G} (2048-209715199, default 209715199): Using default value 209715199 Partition 1 of type Linux and of size 100 GiB is set Command (m for help): t Selected partition 1 Hex code (type L to list all codes): L 0 Empty 24 NEC DOS 81 Minix / old Lin bf Solaris 1 FAT12 27 Hidden NTFS Win 82 Linux swap / So c1 DRDOS/sec (FAT- 2 XENIX root 39 Plan 9 83 Linux c4 DRDOS/sec (FAT- 3 XENIX usr 3c PartitionMagic 84 OS/2 hidden C: c6 DRDOS/sec (FAT- 4 FAT16 <32M 40 Venix 80286 85 Linux extended c7 Syrinx 5 Extended 41 PPC PReP Boot 86 NTFS volume set da Non-FS data 6 FAT16 42 SFS 87 NTFS volume set db CP/M / CTOS / . 7 HPFS/NTFS/exFAT 4d QNX4.x 88 Linux plaintext de Dell Utility 8 AIX 4e QNX4.x 2nd part 8e Linux LVM df BootIt 9 AIX bootable 4f QNX4.x 3rd part 93 Amoeba e1 DOS access a OS/2 Boot Manag 50 OnTrack DM 94 Amoeba BBT e3 DOS R/O b W95 FAT32 51 OnTrack DM6 Aux 9f BSD/OS e4 SpeedStor c W95 FAT32 (LBA) 52 CP/M a0 IBM Thinkpad hi eb BeOS fs e W95 FAT16 (LBA) 53 OnTrack DM6 Aux a5 FreeBSD ee GPT f W95 Ext'd (LBA) 54 OnTrackDM6 a6 OpenBSD ef EFI (FAT-12/16/ 10 OPUS 55 EZ-Drive a7 NeXTSTEP f0 Linux/PA-RISC b 11 Hidden FAT12 56 Golden Bow a8 Darwin UFS f1 SpeedStor 12 Compaq diagnost 5c Priam Edisk a9 NetBSD f4 SpeedStor 14 Hidden FAT16 <3 61 SpeedStor ab Darwin boot f2 DOS secondary 16 Hidden FAT16 63 GNU HURD or Sys af HFS / HFS+ fb VMware VMFS 17 Hidden HPFS/NTF 64 Novell Netware b7 BSDI fs fc VMware VMKCORE 18 AST SmartSleep 65 Novell Netware b8 BSDI swap fd Linux raid auto 1b Hidden W95 FAT3 70 DiskSecure Mult bb Boot Wizard hid fe LANstep 1c Hidden W95 FAT3 75 PC/IX be Solaris boot ff BBT 1e Hidden W95 FAT1 80 Old Minix Hex code (type L to list all codes): 8e Changed type of partition 'Linux' to 'Linux LVM' Command (m for help): p Disk /dev/sdb: 107.4 GB, 107374182400 bytes, 209715200 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk label type: dos Disk identifier: 0x232defba Device Boot Start End Blocks Id System /dev/sdb1 2048 209715199 104856576 8e Linux LVM Command (m for help): w The partition table has been altered! Calling ioctl() to re-read partition table. Syncing disks. ~~~ step4. 創建物理卷 ~~~ [root@DEV-CMDB-DB02 ~]# pvcreate /dev/sdb1 Physical volume "/dev/sdb1" successfully created ~~~ step5. 查看物理卷信息 ~~~ [root@DEV-CMDB-DB02 ~]# pvdisplay --- Physical volume --- PV Name /dev/sda2 VG Name centos_mb-centos7 PV Size 49.51 GiB / not usable 3.00 MiB Allocatable yes PE Size 4.00 MiB Total PE 12674 Free PE 10 Allocated PE 12664 PV UUID 8WbgjB-T1Lf-kqUD-qPFw-UwJu-B9Lc-GAUTUB "/dev/sdb1" is a new physical volume of "100.00 GiB" --- NEW Physical volume --- PV Name /dev/sdb1 VG Name PV Size 100.00 GiB Allocatable NO PE Size 0 Total PE 0 Free PE 0 Allocated PE 0 PV UUID HOknRs-TnMy-wtfX-sGqD-5RK9-dk9q-ze13fj 復制代碼復制代碼 [root@DEV-CMDB-DB02 ~]# vgdisplay --- Volume group --- VG Name centos_mb-centos7 System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 3 VG Access read/write VG Status resizable MAX LV 0 Cur LV 2 Open LV 2 Max PV 0 Cur PV 1 Act PV 1 VG Size 49.51 GiB PE Size 4.00 MiB Total PE 12674 Alloc PE / Size 12664 / 49.47 GiB Free PE / Size 10 / 40.00 MiB VG UUID aN2D2P-Rk1y-wGFz-5l2I-5CcD-7s88-Z8czc7 ~~~ step6. 將新增加的分區/dev/sdb1加入到根目錄分區centos_mb-centos7中 [root@DEV-CMDB-DB02 ~]# vgextend centos_mb-centos7 /dev/sdb1 Volume group "centos_mb-centos7" successfully extended step7. 重新查看卷組信息 ~~~ [root@DEV-CMDB-DB02 ~]# vgdisplay --- Volume group --- VG Name centos_mb-centos7 System ID Format lvm2 Metadata Areas 2 Metadata Sequence No 4 VG Access read/write VG Status resizable MAX LV 0 Cur LV 2 Open LV 2 Max PV 0 Cur PV 2 Act PV 2 VG Size 149.50 GiB PE Size 4.00 MiB Total PE 38273 Alloc PE / Size 12664 / 49.47 GiB Free PE / Size 25609 / 100.04 GiB VG UUID aN2D2P-Rk1y-wGFz-5l2I-5CcD-7s88-Z8czc7 ~~~ step9. 進行卷擴容 ~~~ [root@DEV-CMDB-DB02 ~]# lvextend -l +100%FREE /dev/mapper/centos_mb--centos7-root Size of logical volume centos_mb-centos7/root changed from 44.47 GiB (11384 extents) to 144.50 GiB (36993 extents). Logical volume root successfully resized. ~~~ step10. 調整卷分區大小 ~~~ [root@DEV-CMDB-DB02 ~]# xfs_growfs /dev/mapper/centos_mb--centos7-root meta-data=/dev/mapper/centos_mb--centos7-root isize=256 agcount=4, agsize=2914304 blks = sectsz=512 attr=2, projid32bit=1 = crc=0 finobt=0 data = bsize=4096 blocks=11657216, imaxpct=25 = sunit=0 swidth=0 blks naming =version 2 bsize=4096 ascii-ci=0 ftype=0 log =internal bsize=4096 blocks=5692, version=2 = sectsz=512 sunit=0 blks, lazy-count=1 realtime =none extsz=4096 blocks=0, rtextents=0 data blocks changed from 11657216 to 37880832 ~~~ 最后，查看磁盤信息可以看出根目錄分區大小已成功擴容 ~~~ [root@DEV-CMDB-DB02 ~]# df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/centos_mb--centos7-root 145G 9.8G 135G 7% / devtmpfs 5.9G 0 5.9G 0% /dev tmpfs 5.9G 84K 5.9G 1% /dev/shm tmpfs 5.9G 8.9M 5.9G 1% /run tmpfs 5.9G 0 5.9G 0% /sys/fs/cgroup /dev/sda1 497M 142M 356M 29% /boot tmpfs 1.2G 16K 1.2G 1% /run/user/42 tmpfs 1.2G 0 1.2G 0% /run/user/0 ~~~