# uboot 對spi flash 的識別 flash信息在 drivers/mtd/spi/spi_flash_ids.c： ~~~ const struct spi_flash_info spi_flash_ids[] = { {"w25p80", INFO(0xef2014, 0x0, 64 * 1024, 16, 0) }, {"w25p16", INFO(0xef2015, 0x0, 64 * 1024, 32, 0) }, {"w25p32", INFO(0xef2016, 0x0, 64 * 1024, 64, 0) }, {"w25x40", INFO(0xef3013, 0x0, 64 * 1024, 8, SECT_4K) }, {"w25x16", INFO(0xef3015, 0x0, 64 * 1024, 32, SECT_4K) }, {"w25x32", INFO(0xef3016, 0x0, 64 * 1024, 64, SECT_4K) }, {"w25x64", INFO(0xef3017, 0x0, 64 * 1024, 128, SECT_4K) }, {"w25q80bl", INFO(0xef4014, 0x0, 64 * 1024, 16, RD_FULL | WR_QPP | SECT_4K) }, {"w25q16cl", INFO(0xef4015, 0x0, 64 * 1024, 32, RD_FULL | WR_QPP | SECT_4K) }, {"w25q32bv", INFO(0xef4016, 0x0, 64 * 1024, 64, RD_FULL | WR_QPP | SECT_4K) }, {"w25q64cv", INFO(0xef4017, 0x0, 64 * 1024, 128, RD_FULL | WR_QPP | SECT_4K) }, {"w25q128bv", INFO(0xef4018, 0x0, 64 * 1024, 256, RD_FULL | WR_QPP | SECT_4K) }, {"w25q256", INFO(0xef4019, 0x0, 64 * 1024, 512, RD_FULL | WR_QPP | SECT_4K) }, {"w25q80bw", INFO(0xef5014, 0x0, 64 * 1024, 16, RD_FULL | WR_QPP | SECT_4K) }, {"w25q16dw", INFO(0xef6015, 0x0, 64 * 1024, 32, RD_FULL | WR_QPP | SECT_4K) }, {"w25q32dw", INFO(0xef6016, 0x0, 64 * 1024, 64, RD_FULL | WR_QPP | SECT_4K) }, {"w25q64dw", INFO(0xef6017, 0x0, 64 * 1024, 128, RD_FULL | WR_QPP | SECT_4K) }, {"w25q128fw", INFO(0xef6018, 0x0, 64 * 1024, 256, RD_FULL | WR_QPP | SECT_4K) }, ~~~ ~~~ #define INFO(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags) \ .id = { \ ((_jedec_id) >> 16) & 0xff, \ ((_jedec_id) >> 8) & 0xff, \ (_jedec_id) & 0xff, \ ((_ext_id) >> 8) & 0xff, \ (_ext_id) & 0xff, \ }, \ .id_len = (!(_jedec_id) ? 0 : (3 + ((_ext_id) ? 2 : 0))), \ .sector_size = (_sector_size), \ .n_sectors = (_n_sectors), \ .page_size = 256, \ .flags = (_flags), ~~~ ~~~ struct spi_flash_info { /* Device name ([MANUFLETTER][DEVTYPE][DENSITY][EXTRAINFO]) */ const char *name; /* * This array stores the ID bytes. * The first three bytes are the JEDIC ID. * JEDEC ID zero means "no ID" (mostly older chips). */ u8 id[SPI_FLASH_MAX_ID_LEN]; u8 id_len; /* * The size listed here is what works with SPINOR_OP_SE, which isn't * necessarily called a "sector" by the vendor. */ u32 sector_size; u32 n_sectors; u16 page_size; u16 flags; #define SECT_4K BIT(0) /* CMD_ERASE_4K works uniformly */ #define E_FSR BIT(1) /* use flag status register for */ #define SST_WR BIT(2) /* use SST byte/word programming */ #define WR_QPP BIT(3) /* use Quad Page Program */ #define RD_QUAD BIT(4) /* use Quad Read */ #define RD_DUAL BIT(5) /* use Dual Read */ #define RD_QUADIO BIT(6) /* use Quad IO Read */ #define RD_DUALIO BIT(7) /* use Dual IO Read */ #define RD_FULL (RD_QUAD | RD_DUAL | RD_QUADIO | RD_DUALIO) }; ~~~