### 導航 - [索引](../genindex.xhtml "總目錄") - [模塊](../py-modindex.xhtml "Python 模塊索引") | - [下一頁](sysconfig.xhtml "sysconfig --- Provide access to Python's configuration information") | - [上一頁](python.xhtml "Python運行時服務") | -  - [Python](https://www.python.org/) ? - zh\_CN 3.7.3 [文檔](../index.xhtml) ? - [Python 標準庫](index.xhtml) ? - [Python運行時服務](python.xhtml) ? - $('.inline-search').show(0); | # [`sys`](#module-sys "sys: Access system-specific parameters and functions.") --- 系統相關的參數和函數 - - - - - - 該模塊提供了一些變量和函數。這些變量可能被解釋器使用，也可能由解釋器提供。這些函數會影響解釋器。本模塊總是可用的。 `sys.``abiflags`在POSIX系統上，以標準的 `configure` 腳本構建的 Python 中，這個變量會包含 [**PEP 3149**](https://www.python.org/dev/peps/pep-3149) \[https://www.python.org/dev/peps/pep-3149\] 中定義的ABI標簽。 3\.2 新版功能. `sys.``argv`一個列表，其中包含了被傳遞給 Python 腳本的命令行參數。 `argv[0]` 為腳本的名稱（是否是完整的路徑名取決于操作系統）。如果是通過 Python 解釋器的命令行參數 [`-c`](../using/cmdline.xhtml#cmdoption-c) 來執行的， `argv[0]` 會被設置成字符串 `'-c'` 。如果沒有腳本名被傳遞給 Python 解釋器， `argv[0]` 為空字符串。 為了遍歷標準輸入，或者通過命令行傳遞的文件列表，參照 [`fileinput`](fileinput.xhtml#module-fileinput "fileinput: Loop over standard input or a list of files.") 模塊 注解 On Unix, command line arguments are passed by bytes from OS. Python decodes them with filesystem encoding and "surrogateescape" error handler. When you need original bytes, you can get it by `[os.fsencode(arg) for arg in sys.argv]`. `sys.``base_exec_prefix`在 `site.py` 運行之前， Python 啟動的時候被設置為跟 [`exec_prefix`](#sys.exec_prefix "sys.exec_prefix") 同樣的值。如果不是運行在 [虛擬環境](venv.xhtml#venv-def) 中，兩個值會保持相同；如果 `site.py` 發現處于一個虛擬環境中， [`prefix`](#sys.prefix "sys.prefix") 和 [`exec_prefix`](#sys.exec_prefix "sys.exec_prefix") 將會指向虛擬環境。然而 [`base_prefix`](#sys.base_prefix "sys.base_prefix") 和 [`base_exec_prefix`](#sys.base_exec_prefix "sys.base_exec_prefix") 將仍然會指向基礎的 Python 環境（用來創建虛擬環境的 Python 環境） 3\.3 新版功能. `sys.``base_prefix`在 `site.py` 運行之前， Python 啟動的時候被設置為跟 [`prefix`](#sys.prefix "sys.prefix") 同樣的值。如果不是運行在 [虛擬環境](venv.xhtml#venv-def) 中, 兩個值會保持相同；如果 `site.py` 發現處于一個虛擬環境中， [`prefix`](#sys.prefix "sys.prefix") 和 [`exec_prefix`](#sys.exec_prefix "sys.exec_prefix") 將會指向虛擬環境。然而 [`base_prefix`](#sys.base_prefix "sys.base_prefix") 和 [`base_exec_prefix`](#sys.base_exec_prefix "sys.base_exec_prefix") 將仍然會指向基礎的 Python 環境（用來創建虛擬環境的 Python 環境） 3\.3 新版功能. `sys.``byteorder`本地字節順序的指示符。在大端序（最高有效位優先）操作系統上值為 `'big'` ，在小端序（最低有效位優先）操作系統上為 `'little'` 。 `sys.``builtin_module_names`一個元素為字符串的元組。包含了所有的被編譯進 Python 解釋器的模塊。（這個信息無法通過其他的辦法獲取， `modules.keys()` 只包括被導入過的模塊。） `sys.``call_tracing`(*func*, *args*)Call `func(*args)`, while tracing is enabled. The tracing state is saved, and restored afterwards. This is intended to be called from a debugger from a checkpoint, to recursively debug some other code. `sys.``copyright`一個字符串，包含了 Python 解釋器有關的版權信息 `sys.``_clear_type_cache`()清除內部的類型緩存。類型緩存是為了加速查找方法和屬性的。在調試引用泄漏的時候調用這個函數 *只會* 清除不必要的引用。 這個函數應該只在內部為了一些特定的目的使用。 `sys.``_current_frames`()返回一個字典，將每個線程的標識符映射到調用函數時該線程中當前活動的最頂層堆棧幀。注意 [`traceback`](traceback.xhtml#module-traceback "traceback: Print or retrieve a stack traceback.") 模塊中的函數可以在給定幀的情況下構建調用堆棧。 This is most useful for debugging deadlock: this function does not require the deadlocked threads' cooperation, and such threads' call stacks are frozen for as long as they remain deadlocked. The frame returned for a non-deadlocked thread may bear no relationship to that thread's current activity by the time calling code examines the frame. 這個函數應該只在內部為了一些特定的目的使用。 `sys.``breakpointhook`()This hook function is called by built-in [`breakpoint()`](functions.xhtml#breakpoint "breakpoint"). By default, it drops you into the [`pdb`](pdb.xhtml#module-pdb "pdb: The Python debugger for interactive interpreters.") debugger, but it can be set to any other function so that you can choose which debugger gets used. The signature of this function is dependent on what it calls. For example, the default binding (e.g. `pdb.set_trace()`) expects no arguments, but you might bind it to a function that expects additional arguments (positional and/or keyword). The built-in `breakpoint()` function passes its `*args` and `**kws` straight through. Whatever `breakpointhooks()` returns is returned from `breakpoint()`. The default implementation first consults the environment variable [`PYTHONBREAKPOINT`](../using/cmdline.xhtml#envvar-PYTHONBREAKPOINT). If that is set to `"0"` then this function returns immediately; i.e. it is a no-op. If the environment variable is not set, or is set to the empty string, `pdb.set_trace()` is called. Otherwise this variable should name a function to run, using Python's dotted-import nomenclature, e.g. `package.subpackage.module.function`. In this case, `package.subpackage.module` would be imported and the resulting module must have a callable named `function()`. This is run, passing in `*args` and `**kws`, and whatever `function()` returns, `sys.breakpointhook()` returns to the built-in [`breakpoint()`](functions.xhtml#breakpoint "breakpoint")function. Note that if anything goes wrong while importing the callable named by [`PYTHONBREAKPOINT`](../using/cmdline.xhtml#envvar-PYTHONBREAKPOINT), a [`RuntimeWarning`](exceptions.xhtml#RuntimeWarning "RuntimeWarning") is reported and the breakpoint is ignored. Also note that if `sys.breakpointhook()` is overridden programmatically, [`PYTHONBREAKPOINT`](../using/cmdline.xhtml#envvar-PYTHONBREAKPOINT) is *not* consulted. 3\.7 新版功能. `sys.``_debugmallocstats`()Print low-level information to stderr about the state of CPython's memory allocator. If Python is configured --with-pydebug, it also performs some expensive internal consistency checks. 3\.3 新版功能. **CPython implementation detail:** This function is specific to CPython. The exact output format is not defined here, and may change. `sys.``dllhandle`Integer specifying the handle of the Python DLL. [可用性](intro.xhtml#availability): Windows。 `sys.``displayhook`(*value*)If *value* is not `None`, this function prints `repr(value)` to `sys.stdout`, and saves *value* in `builtins._`. If `repr(value)` is not encodable to `sys.stdout.encoding` with `sys.stdout.errors` error handler (which is probably `'strict'`), encode it to `sys.stdout.encoding` with `'backslashreplace'` error handler. `sys.displayhook` is called on the result of evaluating an [expression](../glossary.xhtml#term-expression)entered in an interactive Python session. The display of these values can be customized by assigning another one-argument function to `sys.displayhook`. Pseudo-code: ``` def displayhook(value): if value is None: return # Set '_' to None to avoid recursion builtins._ = None text = repr(value) try: sys.stdout.write(text) except UnicodeEncodeError: bytes = text.encode(sys.stdout.encoding, 'backslashreplace') if hasattr(sys.stdout, 'buffer'): sys.stdout.buffer.write(bytes) else: text = bytes.decode(sys.stdout.encoding, 'strict') sys.stdout.write(text) sys.stdout.write("\n") builtins._ = value ``` 在 3.2 版更改: Use `'backslashreplace'` error handler on [`UnicodeEncodeError`](exceptions.xhtml#UnicodeEncodeError "UnicodeEncodeError"). `sys.``dont_write_bytecode`If this is true, Python won't try to write `.pyc` files on the import of source modules. This value is initially set to `True` or `False` depending on the [`-B`](../using/cmdline.xhtml#id1) command line option and the [`PYTHONDONTWRITEBYTECODE`](../using/cmdline.xhtml#envvar-PYTHONDONTWRITEBYTECODE) environment variable, but you can set it yourself to control bytecode file generation. `sys.``excepthook`(*type*, *value*, *traceback*)This function prints out a given traceback and exception to `sys.stderr`. When an exception is raised and uncaught, the interpreter calls `sys.excepthook` with three arguments, the exception class, exception instance, and a traceback object. In an interactive session this happens just before control is returned to the prompt; in a Python program this happens just before the program exits. The handling of such top-level exceptions can be customized by assigning another three-argument function to `sys.excepthook`. `sys.``__breakpointhook__``sys.``__displayhook__``sys.``__excepthook__`These objects contain the original values of `breakpointhook`, `displayhook`, and `excepthook` at the start of the program. They are saved so that `breakpointhook`, `displayhook` and `excepthook` can be restored in case they happen to get replaced with broken or alternative objects. 3\.7 新版功能: \_\_breakpointhook\_\_ `sys.``exc_info`()This function returns a tuple of three values that give information about the exception that is currently being handled. The information returned is specific both to the current thread and to the current stack frame. If the current stack frame is not handling an exception, the information is taken from the calling stack frame, or its caller, and so on until a stack frame is found that is handling an exception. Here, "handling an exception" is defined as "executing an except clause." For any stack frame, only information about the exception being currently handled is accessible. If no exception is being handled anywhere on the stack, a tuple containing three `None` values is returned. Otherwise, the values returned are `(type, value, traceback)`. Their meaning is: *type* gets the type of the exception being handled (a subclass of [`BaseException`](exceptions.xhtml#BaseException "BaseException")); *value* gets the exception instance (an instance of the exception type); *traceback* gets a traceback object (see the Reference Manual) which encapsulates the call stack at the point where the exception originally occurred. `sys.``exec_prefix`A string giving the site-specific directory prefix where the platform-dependent Python files are installed; by default, this is also `'/usr/local'`. This can be set at build time with the `--exec-prefix` argument to the **configure** script. Specifically, all configuration files (e.g. the `pyconfig.h` header file) are installed in the directory `exec_prefix/lib/pythonX.Y/config`, and shared library modules are installed in `exec_prefix/lib/pythonX.Y/lib-dynload`, where *X.Y*is the version number of Python, for example `3.2`. 注解 If a [virtual environment](venv.xhtml#venv-def) is in effect, this value will be changed in `site.py` to point to the virtual environment. The value for the Python installation will still be available, via [`base_exec_prefix`](#sys.base_exec_prefix "sys.base_exec_prefix"). `sys.``executable`A string giving the absolute path of the executable binary for the Python interpreter, on systems where this makes sense. If Python is unable to retrieve the real path to its executable, [`sys.executable`](#sys.executable "sys.executable") will be an empty string or `None`. `sys.``exit`(\[*arg*\])Exit from Python. This is implemented by raising the [`SystemExit`](exceptions.xhtml#SystemExit "SystemExit")exception, so cleanup actions specified by finally clauses of [`try`](../reference/compound_stmts.xhtml#try)statements are honored, and it is possible to intercept the exit attempt at an outer level. The optional argument *arg* can be an integer giving the exit status (defaulting to zero), or another type of object. If it is an integer, zero is considered "successful termination" and any nonzero value is considered "abnormal termination" by shells and the like. Most systems require it to be in the range 0--127, and produce undefined results otherwise. Some systems have a convention for assigning specific meanings to specific exit codes, but these are generally underdeveloped; Unix programs generally use 2 for command line syntax errors and 1 for all other kind of errors. If another type of object is passed, `None` is equivalent to passing zero, and any other object is printed to [`stderr`](#sys.stderr "sys.stderr") and results in an exit code of 1. In particular, `sys.exit("some error message")` is a quick way to exit a program when an error occurs. Since [`exit()`](constants.xhtml#exit "exit") ultimately "only" raises an exception, it will only exit the process when called from the main thread, and the exception is not intercepted. 在 3.6 版更改: If an error occurs in the cleanup after the Python interpreter has caught [`SystemExit`](exceptions.xhtml#SystemExit "SystemExit") (such as an error flushing buffered data in the standard streams), the exit status is changed to 120. `sys.``flags`The [struct sequence](../glossary.xhtml#term-struct-sequence) *flags* exposes the status of command line flags. The attributes are read only. 屬性 flag `debug` [`-d`](../using/cmdline.xhtml#cmdoption-d) [`inspect`](inspect.xhtml#module-inspect "inspect: Extract information and source code from live objects.") [`-i`](../using/cmdline.xhtml#cmdoption-i) `interactive` [`-i`](../using/cmdline.xhtml#cmdoption-i) `isolated` [`-I`](../using/cmdline.xhtml#id2) `optimize` [`-O`](../using/cmdline.xhtml#cmdoption-o) or [`-OO`](../using/cmdline.xhtml#cmdoption-oo) [`dont_write_bytecode`](#sys.dont_write_bytecode "sys.dont_write_bytecode") [`-B`](../using/cmdline.xhtml#id1) `no_user_site` [`-s`](../using/cmdline.xhtml#cmdoption-s) `no_site` [`-S`](../using/cmdline.xhtml#id3) `ignore_environment` [`-E`](../using/cmdline.xhtml#cmdoption-e) `verbose` [`-v`](../using/cmdline.xhtml#id4) `bytes_warning` [`-b`](../using/cmdline.xhtml#cmdoption-b) `quiet` [`-q`](../using/cmdline.xhtml#cmdoption-q) `hash_randomization` [`-R`](../using/cmdline.xhtml#cmdoption-r) `dev_mode` [`-X`](../using/cmdline.xhtml#id5)`dev` `utf8_mode` [`-X`](../using/cmdline.xhtml#id5)`utf8` 在 3.2 版更改: Added `quiet` attribute for the new [`-q`](../using/cmdline.xhtml#cmdoption-q) flag. 3\.2.3 新版功能: The `hash_randomization` attribute. 在 3.3 版更改: Removed obsolete `division_warning` attribute. 在 3.4 版更改: Added `isolated` attribute for [`-I`](../using/cmdline.xhtml#id2)`isolated` flag. 在 3.7 版更改: Added `dev_mode` attribute for the new [`-X`](../using/cmdline.xhtml#id5)`dev` flag and `utf8_mode` attribute for the new [`-X`](../using/cmdline.xhtml#id5)`utf8` flag. `sys.``float_info`A [struct sequence](../glossary.xhtml#term-struct-sequence) holding information about the float type. It contains low level information about the precision and internal representation. The values correspond to the various floating-point constants defined in the standard header file `float.h` for the 'C' programming language; see section 5.2.4.2.2 of the 1999 ISO/IEC C standard [\[C99\]](#c99), 'Characteristics of floating types', for details. 屬性 float.h macro explanation `epsilon` DBL\_EPSILON difference between 1 and the least value greater than 1 that is representable as a float `dig` DBL\_DIG maximum number of decimal digits that can be faithfully represented in a float; see below `mant_dig` DBL\_MANT\_DIG float precision: the number of base-`radix`digits in the significand of a float [`max`](functions.xhtml#max "max") DBL\_MAX maximum representable finite float `max_exp` DBL\_MAX\_EXP maximum integer e such that `radix**(e-1)` is a representable finite float `max_10_exp` DBL\_MAX\_10\_EXP maximum integer e such that `10**e` is in the range of representable finite floats [`min`](functions.xhtml#min "min") DBL\_MIN minimum positive normalized float `min_exp` DBL\_MIN\_EXP minimum integer e such that `radix**(e-1)` is a normalized float `min_10_exp` DBL\_MIN\_10\_EXP minimum integer e such that `10**e` is a normalized float `radix` FLT\_RADIX radix of exponent representation `rounds` FLT\_ROUNDS integer constant representing the rounding mode used for arithmetic operations. This reflects the value of the system FLT\_ROUNDS macro at interpreter startup time. See section 5.2.4.2.2 of the C99 standard for an explanation of the possible values and their meanings. The attribute `sys.float_info.dig` needs further explanation. If `s` is any string representing a decimal number with at most `sys.float_info.dig` significant digits, then converting `s` to a float and back again will recover a string representing the same decimal value: ``` >>> import sys >>> sys.float_info.dig 15 >>> s = '3.14159265358979' # decimal string with 15 significant digits >>> format(float(s), '.15g') # convert to float and back -> same value '3.14159265358979' ``` But for strings with more than `sys.float_info.dig` significant digits, this isn't always true: ``` >>> s = '9876543211234567' # 16 significant digits is too many! >>> format(float(s), '.16g') # conversion changes value '9876543211234568' ``` `sys.``float_repr_style`A string indicating how the [`repr()`](functions.xhtml#repr "repr") function behaves for floats. If the string has value `'short'` then for a finite float `x`, `repr(x)` aims to produce a short string with the property that `float(repr(x)) == x`. This is the usual behaviour in Python 3.1 and later. Otherwise, `float_repr_style` has value `'legacy'` and `repr(x)` behaves in the same way as it did in versions of Python prior to 3.1. 3\.1 新版功能. `sys.``getallocatedblocks`()Return the number of memory blocks currently allocated by the interpreter, regardless of their size. This function is mainly useful for tracking and debugging memory leaks. Because of the interpreter's internal caches, the result can vary from call to call; you may have to call [`_clear_type_cache()`](#sys._clear_type_cache "sys._clear_type_cache") and [`gc.collect()`](gc.xhtml#gc.collect "gc.collect") to get more predictable results. If a Python build or implementation cannot reasonably compute this information, [`getallocatedblocks()`](#sys.getallocatedblocks "sys.getallocatedblocks") is allowed to return 0 instead. 3\.4 新版功能. `sys.``getandroidapilevel`()Return the build time API version of Android as an integer. [Availability](intro.xhtml#availability): Android. 3\.7 新版功能. `sys.``getcheckinterval`()Return the interpreter's "check interval"; see [`setcheckinterval()`](#sys.setcheckinterval "sys.setcheckinterval"). 3\.2 版后已移除: Use [`getswitchinterval()`](#sys.getswitchinterval "sys.getswitchinterval") instead. `sys.``getdefaultencoding`()Return the name of the current default string encoding used by the Unicode implementation. `sys.``getdlopenflags`()Return the current value of the flags that are used for `dlopen()` calls. Symbolic names for the flag values can be found in the [`os`](os.xhtml#module-os "os: Miscellaneous operating system interfaces.") module (`RTLD_xxx` constants, e.g. [`os.RTLD_LAZY`](os.xhtml#os.RTLD_LAZY "os.RTLD_LAZY")). [可用性](intro.xhtml#availability): Unix。 `sys.``getfilesystemencoding`()Return the name of the encoding used to convert between Unicode filenames and bytes filenames. For best compatibility, str should be used for filenames in all cases, although representing filenames as bytes is also supported. Functions accepting or returning filenames should support either str or bytes and internally convert to the system's preferred representation. This encoding is always ASCII-compatible. [`os.fsencode()`](os.xhtml#os.fsencode "os.fsencode") and [`os.fsdecode()`](os.xhtml#os.fsdecode "os.fsdecode") should be used to ensure that the correct encoding and errors mode are used. - In the UTF-8 mode, the encoding is `utf-8` on any platform. - On Mac OS X, the encoding is `'utf-8'`. - On Unix, the encoding is the locale encoding. - On Windows, the encoding may be `'utf-8'` or `'mbcs'`, depending on user configuration. 在 3.2 版更改: [`getfilesystemencoding()`](#sys.getfilesystemencoding "sys.getfilesystemencoding") result cannot be `None` anymore. 在 3.6 版更改: Windows is no longer guaranteed to return `'mbcs'`. See [**PEP 529**](https://www.python.org/dev/peps/pep-0529) \[https://www.python.org/dev/peps/pep-0529\]and [`_enablelegacywindowsfsencoding()`](#sys._enablelegacywindowsfsencoding "sys._enablelegacywindowsfsencoding") for more information. 在 3.7 版更改: Return 'utf-8' in the UTF-8 mode. `sys.``getfilesystemencodeerrors`()Return the name of the error mode used to convert between Unicode filenames and bytes filenames. The encoding name is returned from [`getfilesystemencoding()`](#sys.getfilesystemencoding "sys.getfilesystemencoding"). [`os.fsencode()`](os.xhtml#os.fsencode "os.fsencode") and [`os.fsdecode()`](os.xhtml#os.fsdecode "os.fsdecode") should be used to ensure that the correct encoding and errors mode are used. 3\.6 新版功能. `sys.``getrefcount`(*object*)Return the reference count of the *object*. The count returned is generally one higher than you might expect, because it includes the (temporary) reference as an argument to [`getrefcount()`](#sys.getrefcount "sys.getrefcount"). `sys.``getrecursionlimit`()Return the current value of the recursion limit, the maximum depth of the Python interpreter stack. This limit prevents infinite recursion from causing an overflow of the C stack and crashing Python. It can be set by [`setrecursionlimit()`](#sys.setrecursionlimit "sys.setrecursionlimit"). `sys.``getsizeof`(*object*\[, *default*\])Return the size of an object in bytes. The object can be any type of object. All built-in objects will return correct results, but this does not have to hold true for third-party extensions as it is implementation specific. Only the memory consumption directly attributed to the object is accounted for, not the memory consumption of objects it refers to. If given, *default* will be returned if the object does not provide means to retrieve the size. Otherwise a [`TypeError`](exceptions.xhtml#TypeError "TypeError") will be raised. [`getsizeof()`](#sys.getsizeof "sys.getsizeof") calls the object's `__sizeof__` method and adds an additional garbage collector overhead if the object is managed by the garbage collector. See [recursive sizeof recipe](https://code.activestate.com/recipes/577504) \[https://code.activestate.com/recipes/577504\]for an example of using [`getsizeof()`](#sys.getsizeof "sys.getsizeof") recursively to find the size of containers and all their contents. `sys.``getswitchinterval`()Return the interpreter's "thread switch interval"; see [`setswitchinterval()`](#sys.setswitchinterval "sys.setswitchinterval"). 3\.2 新版功能. `sys.``_getframe`(\[*depth*\])Return a frame object from the call stack. If optional integer *depth* is given, return the frame object that many calls below the top of the stack. If that is deeper than the call stack, [`ValueError`](exceptions.xhtml#ValueError "ValueError") is raised. The default for *depth* is zero, returning the frame at the top of the call stack. **CPython implementation detail:** This function should be used for internal and specialized purposes only. It is not guaranteed to exist in all implementations of Python. `sys.``getprofile`()Get the profiler function as set by [`setprofile()`](#sys.setprofile "sys.setprofile"). `sys.``gettrace`()Get the trace function as set by [`settrace()`](#sys.settrace "sys.settrace"). **CPython implementation detail:** The [`gettrace()`](#sys.gettrace "sys.gettrace") function is intended only for implementing debuggers, profilers, coverage tools and the like. Its behavior is part of the implementation platform, rather than part of the language definition, and thus may not be available in all Python implementations. `sys.``getwindowsversion`()Return a named tuple describing the Windows version currently running. The named elements are *major*, *minor*, *build*, *platform*, *service\_pack*, *service\_pack\_minor*, *service\_pack\_major*, *suite\_mask*, *product\_type* and *platform\_version*. *service\_pack* contains a string, *platform\_version* a 3-tuple and all other values are integers. The components can also be accessed by name, so `sys.getwindowsversion()[0]` is equivalent to `sys.getwindowsversion().major`. For compatibility with prior versions, only the first 5 elements are retrievable by indexing. *platform* will be `2 (VER_PLATFORM_WIN32_NT)`. *product\_type* may be one of the following values: 常數 意義 `1 (VER_NT_WORKSTATION)` The system is a workstation. `2 (VER_NT_DOMAIN_CONTROLLER)` The system is a domain controller. `3 (VER_NT_SERVER)` The system is a server, but not a domain controller. This function wraps the Win32 `GetVersionEx()` function; see the Microsoft documentation on `OSVERSIONINFOEX()` for more information about these fields. *platform\_version* returns the accurate major version, minor version and build number of the current operating system, rather than the version that is being emulated for the process. It is intended for use in logging rather than for feature detection. [可用性](intro.xhtml#availability): Windows。 在 3.2 版更改: Changed to a named tuple and added *service\_pack\_minor*, *service\_pack\_major*, *suite\_mask*, and *product\_type*. 在 3.6 版更改: Added *platform\_version* `sys.``get_asyncgen_hooks`()Returns an *asyncgen\_hooks* object, which is similar to a [`namedtuple`](collections.xhtml#collections.namedtuple "collections.namedtuple") of the form (firstiter, finalizer), where *firstiter* and *finalizer* are expected to be either `None` or functions which take an [asynchronous generator iterator](../glossary.xhtml#term-asynchronous-generator-iterator) as an argument, and are used to schedule finalization of an asynchronous generator by an event loop. 3\.6 新版功能: See [**PEP 525**](https://www.python.org/dev/peps/pep-0525) \[https://www.python.org/dev/peps/pep-0525\] for more details. 注解 This function has been added on a provisional basis (see [**PEP 411**](https://www.python.org/dev/peps/pep-0411) \[https://www.python.org/dev/peps/pep-0411\]for details.) `sys.``get_coroutine_origin_tracking_depth`()Get the current coroutine origin tracking depth, as set by [`set_coroutine_origin_tracking_depth()`](#sys.set_coroutine_origin_tracking_depth "sys.set_coroutine_origin_tracking_depth"). 3\.7 新版功能. 注解 This function has been added on a provisional basis (see [**PEP 411**](https://www.python.org/dev/peps/pep-0411) \[https://www.python.org/dev/peps/pep-0411\]for details.) Use it only for debugging purposes. `sys.``get_coroutine_wrapper`()Returns `None`, or a wrapper set by [`set_coroutine_wrapper()`](#sys.set_coroutine_wrapper "sys.set_coroutine_wrapper"). 3\.5 新版功能: See [**PEP 492**](https://www.python.org/dev/peps/pep-0492) \[https://www.python.org/dev/peps/pep-0492\] for more details. 注解 This function has been added on a provisional basis (see [**PEP 411**](https://www.python.org/dev/peps/pep-0411) \[https://www.python.org/dev/peps/pep-0411\]for details.) Use it only for debugging purposes. 3\.7 版后已移除: The coroutine wrapper functionality has been deprecated, and will be removed in 3.8. See [bpo-32591](https://bugs.python.org/issue32591) \[https://bugs.python.org/issue32591\] for details. `sys.``hash_info`A [struct sequence](../glossary.xhtml#term-struct-sequence) giving parameters of the numeric hash implementation. For more details about hashing of numeric types, see [數字類型的哈希運算](stdtypes.xhtml#numeric-hash). 屬性 explanation `width` width in bits used for hash values `modulus` prime modulus P used for numeric hash scheme `inf` hash value returned for a positive infinity `nan` hash value returned for a nan `imag` multiplier used for the imaginary part of a complex number `algorithm` name of the algorithm for hashing of str, bytes, and memoryview `hash_bits` internal output size of the hash algorithm `seed_bits` size of the seed key of the hash algorithm 3\.2 新版功能. 在 3.4 版更改: Added *algorithm*, *hash\_bits* and *seed\_bits* `sys.``hexversion`The version number encoded as a single integer. This is guaranteed to increase with each version, including proper support for non-production releases. For example, to test that the Python interpreter is at least version 1.5.2, use: ``` if sys.hexversion >= 0x010502F0: # use some advanced feature ... else: # use an alternative implementation or warn the user ... ``` This is called `hexversion` since it only really looks meaningful when viewed as the result of passing it to the built-in [`hex()`](functions.xhtml#hex "hex") function. The [struct sequence](../glossary.xhtml#term-struct-sequence) [`sys.version_info`](#sys.version_info "sys.version_info") may be used for a more human-friendly encoding of the same information. More details of `hexversion` can be found at [API 和 ABI 版本管理](../c-api/apiabiversion.xhtml#apiabiversion). `sys.``implementation`An object containing information about the implementation of the currently running Python interpreter. The following attributes are required to exist in all Python implementations. *name* is the implementation's identifier, e.g. `'cpython'`. The actual string is defined by the Python implementation, but it is guaranteed to be lower case. *version* is a named tuple, in the same format as [`sys.version_info`](#sys.version_info "sys.version_info"). It represents the version of the Python *implementation*. This has a distinct meaning from the specific version of the Python *language* to which the currently running interpreter conforms, which `sys.version_info` represents. For example, for PyPy 1.8 `sys.implementation.version` might be `sys.version_info(1, 8, 0, 'final', 0)`, whereas `sys.version_info`would be `sys.version_info(2, 7, 2, 'final', 0)`. For CPython they are the same value, since it is the reference implementation. *hexversion* is the implementation version in hexadecimal format, like [`sys.hexversion`](#sys.hexversion "sys.hexversion"). *cache\_tag* is the tag used by the import machinery in the filenames of cached modules. By convention, it would be a composite of the implementation's name and version, like `'cpython-33'`. However, a Python implementation may use some other value if appropriate. If `cache_tag` is set to `None`, it indicates that module caching should be disabled. [`sys.implementation`](#sys.implementation "sys.implementation") may contain additional attributes specific to the Python implementation. These non-standard attributes must start with an underscore, and are not described here. Regardless of its contents, [`sys.implementation`](#sys.implementation "sys.implementation") will not change during a run of the interpreter, nor between implementation versions. (It may change between Python language versions, however.) See [**PEP 421**](https://www.python.org/dev/peps/pep-0421) \[https://www.python.org/dev/peps/pep-0421\] for more information. 3\.3 新版功能. `sys.``int_info`A [struct sequence](../glossary.xhtml#term-struct-sequence) that holds information about Python's internal representation of integers. The attributes are read only. 屬性 解釋 `bits_per_digit` number of bits held in each digit. Python integers are stored internally in base `2**int_info.bits_per_digit` `sizeof_digit` size in bytes of the C type used to represent a digit 3\.1 新版功能. `sys.``__interactivehook__`When this attribute exists, its value is automatically called (with no arguments) when the interpreter is launched in [interactive mode](../tutorial/interpreter.xhtml#tut-interactive). This is done after the [`PYTHONSTARTUP`](../using/cmdline.xhtml#envvar-PYTHONSTARTUP) file is read, so that you can set this hook there. The [`site`](site.xhtml#module-site "site: Module responsible for site-specific configuration.") module [sets this](site.xhtml#rlcompleter-config). 3\.4 新版功能. `sys.``intern`(*string*)Enter *string* in the table of "interned" strings and return the interned string -- which is *string* itself or a copy. Interning strings is useful to gain a little performance on dictionary lookup -- if the keys in a dictionary are interned, and the lookup key is interned, the key comparisons (after hashing) can be done by a pointer compare instead of a string compare. Normally, the names used in Python programs are automatically interned, and the dictionaries used to hold module, class or instance attributes have interned keys. Interned strings are not immortal; you must keep a reference to the return value of [`intern()`](#sys.intern "sys.intern") around to benefit from it. `sys.``is_finalizing`()Return [`True`](constants.xhtml#True "True") if the Python interpreter is [shutting down](../glossary.xhtml#term-interpreter-shutdown), [`False`](constants.xhtml#False "False") otherwise. 3\.5 新版功能. `sys.``last_type``sys.``last_value``sys.``last_traceback`These three variables are not always defined; they are set when an exception is not handled and the interpreter prints an error message and a stack traceback. Their intended use is to allow an interactive user to import a debugger module and engage in post-mortem debugging without having to re-execute the command that caused the error. (Typical use is `import pdb; pdb.pm()` to enter the post-mortem debugger; see [`pdb`](pdb.xhtml#module-pdb "pdb: The Python debugger for interactive interpreters.") module for more information.) The meaning of the variables is the same as that of the return values from [`exc_info()`](#sys.exc_info "sys.exc_info") above. `sys.``maxsize`An integer giving the maximum value a variable of type `Py_ssize_t` can take. It's usually `2**31 - 1` on a 32-bit platform and `2**63 - 1` on a 64-bit platform. `sys.``maxunicode`An integer giving the value of the largest Unicode code point, i.e. `1114111` (`0x10FFFF` in hexadecimal). 在 3.3 版更改: Before [**PEP 393**](https://www.python.org/dev/peps/pep-0393) \[https://www.python.org/dev/peps/pep-0393\], `sys.maxunicode` used to be either `0xFFFF`or `0x10FFFF`, depending on the configuration option that specified whether Unicode characters were stored as UCS-2 or UCS-4. `sys.``meta_path`A list of [meta path finder](../glossary.xhtml#term-meta-path-finder) objects that have their [`find_spec()`](importlib.xhtml#importlib.abc.MetaPathFinder.find_spec "importlib.abc.MetaPathFinder.find_spec") methods called to see if one of the objects can find the module to be imported. The [`find_spec()`](importlib.xhtml#importlib.abc.MetaPathFinder.find_spec "importlib.abc.MetaPathFinder.find_spec") method is called with at least the absolute name of the module being imported. If the module to be imported is contained in a package, then the parent package's [`__path__`](../reference/import.xhtml#__path__ "__path__")attribute is passed in as a second argument. The method returns a [module spec](../glossary.xhtml#term-module-spec), or `None` if the module cannot be found. 參見 [`importlib.abc.MetaPathFinder`](importlib.xhtml#importlib.abc.MetaPathFinder "importlib.abc.MetaPathFinder")The abstract base class defining the interface of finder objects on [`meta_path`](#sys.meta_path "sys.meta_path"). [`importlib.machinery.ModuleSpec`](importlib.xhtml#importlib.machinery.ModuleSpec "importlib.machinery.ModuleSpec")The concrete class which [`find_spec()`](importlib.xhtml#importlib.abc.MetaPathFinder.find_spec "importlib.abc.MetaPathFinder.find_spec") should return instances of. 在 3.4 版更改: [Module specs](../glossary.xhtml#term-module-spec) were introduced in Python 3.4, by [**PEP 451**](https://www.python.org/dev/peps/pep-0451) \[https://www.python.org/dev/peps/pep-0451\]. Earlier versions of Python looked for a method called [`find_module()`](importlib.xhtml#importlib.abc.MetaPathFinder.find_module "importlib.abc.MetaPathFinder.find_module"). This is still called as a fallback if a [`meta_path`](#sys.meta_path "sys.meta_path") entry doesn't have a [`find_spec()`](importlib.xhtml#importlib.abc.MetaPathFinder.find_spec "importlib.abc.MetaPathFinder.find_spec") method. `sys.``modules`This is a dictionary that maps module names to modules which have already been loaded. This can be manipulated to force reloading of modules and other tricks. However, replacing the dictionary will not necessarily work as expected and deleting essential items from the dictionary may cause Python to fail. `sys.``path`A list of strings that specifies the search path for modules. Initialized from the environment variable [`PYTHONPATH`](../using/cmdline.xhtml#envvar-PYTHONPATH), plus an installation-dependent default. As initialized upon program startup, the first item of this list, `path[0]`, is the directory containing the script that was used to invoke the Python interpreter. If the script directory is not available (e.g. if the interpreter is invoked interactively or if the script is read from standard input), `path[0]` is the empty string, which directs Python to search modules in the current directory first. Notice that the script directory is inserted *before*the entries inserted as a result of [`PYTHONPATH`](../using/cmdline.xhtml#envvar-PYTHONPATH). A program is free to modify this list for its own purposes. Only strings and bytes should be added to [`sys.path`](#sys.path "sys.path"); all other data types are ignored during import. 參見 Module [`site`](site.xhtml#module-site "site: Module responsible for site-specific configuration.") This describes how to use .pth files to extend [`sys.path`](#sys.path "sys.path"). `sys.``path_hooks`A list of callables that take a path argument to try to create a [finder](../glossary.xhtml#term-finder) for the path. If a finder can be created, it is to be returned by the callable, else raise [`ImportError`](exceptions.xhtml#ImportError "ImportError"). Originally specified in [**PEP 302**](https://www.python.org/dev/peps/pep-0302) \[https://www.python.org/dev/peps/pep-0302\]. `sys.``path_importer_cache`A dictionary acting as a cache for [finder](../glossary.xhtml#term-finder) objects. The keys are paths that have been passed to [`sys.path_hooks`](#sys.path_hooks "sys.path_hooks") and the values are the finders that are found. If a path is a valid file system path but no finder is found on [`sys.path_hooks`](#sys.path_hooks "sys.path_hooks") then `None` is stored. Originally specified in [**PEP 302**](https://www.python.org/dev/peps/pep-0302) \[https://www.python.org/dev/peps/pep-0302\]. 在 3.3 版更改: `None` is stored instead of [`imp.NullImporter`](imp.xhtml#imp.NullImporter "imp.NullImporter") when no finder is found. `sys.``platform`This string contains a platform identifier that can be used to append platform-specific components to [`sys.path`](#sys.path "sys.path"), for instance. For Unix systems, except on Linux, this is the lowercased OS name as returned by `uname -s` with the first part of the version as returned by `uname -r` appended, e.g. `'sunos5'` or `'freebsd8'`, *at the time when Python was built*. Unless you want to test for a specific system version, it is therefore recommended to use the following idiom: ``` if sys.platform.startswith('freebsd'): # FreeBSD-specific code here... elif sys.platform.startswith('linux'): # Linux-specific code here... ``` For other systems, the values are: System `platform` value Linux `'linux'` Windows `'win32'` Windows/Cygwin `'cygwin'` Mac OS X `'darwin'` 在 3.3 版更改: On Linux, [`sys.platform`](#sys.platform "sys.platform") doesn't contain the major version anymore. It is always `'linux'`, instead of `'linux2'` or `'linux3'`. Since older Python versions include the version number, it is recommended to always use the `startswith` idiom presented above. 參見 [`os.name`](os.xhtml#os.name "os.name") has a coarser granularity. [`os.uname()`](os.xhtml#os.uname "os.uname") gives system-dependent version information. [`platform`](platform.xhtml#module-platform "platform: Retrieves as much platform identifying data as possible.") 模塊提供了對系統標識更詳細的檢查。 `sys.``prefix`A string giving the site-specific directory prefix where the platform independent Python files are installed; by default, this is the string `'/usr/local'`. This can be set at build time with the `--prefix`argument to the **configure** script. The main collection of Python library modules is installed in the directory `prefix/lib/pythonX.Y`while the platform independent header files (all except `pyconfig.h`) are stored in `prefix/include/pythonX.Y`, where *X.Y* is the version number of Python, for example `3.2`. 注解 If a [virtual environment](venv.xhtml#venv-def) is in effect, this value will be changed in `site.py` to point to the virtual environment. The value for the Python installation will still be available, via [`base_prefix`](#sys.base_prefix "sys.base_prefix"). `sys.``ps1``sys.``ps2`Strings specifying the primary and secondary prompt of the interpreter. These are only defined if the interpreter is in interactive mode. Their initial values in this case are `'>>> '` and `'... '`. If a non-string object is assigned to either variable, its [`str()`](stdtypes.xhtml#str "str") is re-evaluated each time the interpreter prepares to read a new interactive command; this can be used to implement a dynamic prompt. `sys.``setcheckinterval`(*interval*)Set the interpreter's "check interval". This integer value determines how often the interpreter checks for periodic things such as thread switches and signal handlers. The default is `100`, meaning the check is performed every 100 Python virtual instructions. Setting it to a larger value may increase performance for programs using threads. Setting it to a value `<=` 0 checks every virtual instruction, maximizing responsiveness as well as overhead. 3\.2 版后已移除: This function doesn't have an effect anymore, as the internal logic for thread switching and asynchronous tasks has been rewritten. Use [`setswitchinterval()`](#sys.setswitchinterval "sys.setswitchinterval") instead. `sys.``setdlopenflags`(*n*)Set the flags used by the interpreter for `dlopen()` calls, such as when the interpreter loads extension modules. Among other things, this will enable a lazy resolving of symbols when importing a module, if called as `sys.setdlopenflags(0)`. To share symbols across extension modules, call as `sys.setdlopenflags(os.RTLD_GLOBAL)`. Symbolic names for the flag values can be found in the [`os`](os.xhtml#module-os "os: Miscellaneous operating system interfaces.") module (`RTLD_xxx` constants, e.g. [`os.RTLD_LAZY`](os.xhtml#os.RTLD_LAZY "os.RTLD_LAZY")). [可用性](intro.xhtml#availability): Unix。 `sys.``setprofile`(*profilefunc*)Set the system's profile function, which allows you to implement a Python source code profiler in Python. See chapter [The Python Profilers](profile.xhtml#profile) for more information on the Python profiler. The system's profile function is called similarly to the system's trace function (see [`settrace()`](#sys.settrace "sys.settrace")), but it is called with different events, for example it isn't called for each executed line of code (only on call and return, but the return event is reported even when an exception has been set). The function is thread-specific, but there is no way for the profiler to know about context switches between threads, so it does not make sense to use this in the presence of multiple threads. Also, its return value is not used, so it can simply return `None`. Error in the profile function will cause itself unset. Profile functions should have three arguments: *frame*, *event*, and *arg*. *frame* is the current stack frame. *event* is a string: `'call'`, `'return'`, `'c_call'`, `'c_return'`, or `'c_exception'`. *arg* depends on the event type. The events have the following meaning: `'call'`A function is called (or some other code block entered). The profile function is called; *arg* is `None`. `'return'`A function (or other code block) is about to return. The profile function is called; *arg* is the value that will be returned, or `None`if the event is caused by an exception being raised. `'c_call'`A C function is about to be called. This may be an extension function or a built-in. *arg* is the C function object. `'c_return'`A C function has returned. *arg* is the C function object. `'c_exception'`A C function has raised an exception. *arg* is the C function object. `sys.``setrecursionlimit`(*limit*)Set the maximum depth of the Python interpreter stack to *limit*. This limit prevents infinite recursion from causing an overflow of the C stack and crashing Python. The highest possible limit is platform-dependent. A user may need to set the limit higher when they have a program that requires deep recursion and a platform that supports a higher limit. This should be done with care, because a too-high limit can lead to a crash. If the new limit is too low at the current recursion depth, a [`RecursionError`](exceptions.xhtml#RecursionError "RecursionError") exception is raised. 在 3.5.1 版更改: A [`RecursionError`](exceptions.xhtml#RecursionError "RecursionError") exception is now raised if the new limit is too low at the current recursion depth. `sys.``setswitchinterval`(*interval*)Set the interpreter's thread switch interval (in seconds). This floating-point value determines the ideal duration of the "timeslices" allocated to concurrently running Python threads. Please note that the actual value can be higher, especially if long-running internal functions or methods are used. Also, which thread becomes scheduled at the end of the interval is the operating system's decision. The interpreter doesn't have its own scheduler. 3\.2 新版功能. `sys.``settrace`(*tracefunc*)Set the system's trace function, which allows you to implement a Python source code debugger in Python. The function is thread-specific; for a debugger to support multiple threads, it must register a trace function using [`settrace()`](#sys.settrace "sys.settrace") for each thread being debugged or use [`threading.settrace()`](threading.xhtml#threading.settrace "threading.settrace"). Trace functions should have three arguments: *frame*, *event*, and *arg*. *frame* is the current stack frame. *event* is a string: `'call'`, `'line'`, `'return'`, `'exception'` or `'opcode'`. *arg* depends on the event type. The trace function is invoked (with *event* set to `'call'`) whenever a new local scope is entered; it should return a reference to a local trace function to be used that scope, or `None` if the scope shouldn't be traced. The local trace function should return a reference to itself (or to another function for further tracing in that scope), or `None` to turn off tracing in that scope. If there is any error occurred in the trace function, it will be unset, just like `settrace(None)` is called. The events have the following meaning: `'call'`A function is called (or some other code block entered). The global trace function is called; *arg* is `None`; the return value specifies the local trace function. `'line'`The interpreter is about to execute a new line of code or re-execute the condition of a loop. The local trace function is called; *arg* is `None`; the return value specifies the new local trace function. See `Objects/lnotab_notes.txt` for a detailed explanation of how this works. Per-line events may be disabled for a frame by setting `f_trace_lines` to [`False`](constants.xhtml#False "False") on that frame. `'return'`A function (or other code block) is about to return. The local trace function is called; *arg* is the value that will be returned, or `None`if the event is caused by an exception being raised. The trace function's return value is ignored. `'exception'`An exception has occurred. The local trace function is called; *arg* is a tuple `(exception, value, traceback)`; the return value specifies the new local trace function. `'opcode'`The interpreter is about to execute a new opcode (see [`dis`](dis.xhtml#module-dis "dis: Disassembler for Python bytecode.") for opcode details). The local trace function is called; *arg* is `None`; the return value specifies the new local trace function. Per-opcode events are not emitted by default: they must be explicitly requested by setting `f_trace_opcodes` to [`True`](constants.xhtml#True "True") on the frame. Note that as an exception is propagated down the chain of callers, an `'exception'` event is generated at each level. For more information on code and frame objects, refer to [標準類型層級結構](../reference/datamodel.xhtml#types). **CPython implementation detail:** The [`settrace()`](#sys.settrace "sys.settrace") function is intended only for implementing debuggers, profilers, coverage tools and the like. Its behavior is part of the implementation platform, rather than part of the language definition, and thus may not be available in all Python implementations. 在 3.7 版更改: `'opcode'` event type added; `f_trace_lines` and `f_trace_opcodes` attributes added to frames `sys.``set_asyncgen_hooks`(*firstiter*, *finalizer*)Accepts two optional keyword arguments which are callables that accept an [asynchronous generator iterator](../glossary.xhtml#term-asynchronous-generator-iterator) as an argument. The *firstiter*callable will be called when an asynchronous generator is iterated for the first time. The *finalizer* will be called when an asynchronous generator is about to be garbage collected. 3\.6 新版功能: See [**PEP 525**](https://www.python.org/dev/peps/pep-0525) \[https://www.python.org/dev/peps/pep-0525\] for more details, and for a reference example of a *finalizer* method see the implementation of `asyncio.Loop.shutdown_asyncgens` in [Lib/asyncio/base\_events.py](https://github.com/python/cpython/tree/3.7/Lib/asyncio/base_events.py) \[https://github.com/python/cpython/tree/3.7/Lib/asyncio/base\_events.py\] 注解 This function has been added on a provisional basis (see [**PEP 411**](https://www.python.org/dev/peps/pep-0411) \[https://www.python.org/dev/peps/pep-0411\]for details.) `sys.``set_coroutine_origin_tracking_depth`(*depth*)Allows enabling or disabling coroutine origin tracking. When enabled, the `cr_origin` attribute on coroutine objects will contain a tuple of (filename, line number, function name) tuples describing the traceback where the coroutine object was created, with the most recent call first. When disabled, `cr_origin` will be None. To enable, pass a *depth* value greater than zero; this sets the number of frames whose information will be captured. To disable, pass set *depth* to zero. This setting is thread-specific. 3\.7 新版功能. 注解 This function has been added on a provisional basis (see [**PEP 411**](https://www.python.org/dev/peps/pep-0411) \[https://www.python.org/dev/peps/pep-0411\]for details.) Use it only for debugging purposes. `sys.``set_coroutine_wrapper`(*wrapper*)Allows intercepting creation of [coroutine](../glossary.xhtml#term-coroutine) objects (only ones that are created by an [`async def`](../reference/compound_stmts.xhtml#async-def) function; generators decorated with [`types.coroutine()`](types.xhtml#types.coroutine "types.coroutine") or [`asyncio.coroutine()`](asyncio-task.xhtml#asyncio.coroutine "asyncio.coroutine") will not be intercepted). The *wrapper* argument must be either: - a callable that accepts one argument (a coroutine object); - `None`, to reset the wrapper. If called twice, the new wrapper replaces the previous one. The function is thread-specific. The *wrapper* callable cannot define new coroutines directly or indirectly: ``` def wrapper(coro): async def wrap(coro): return await coro return wrap(coro) sys.set_coroutine_wrapper(wrapper) async def foo(): pass # The following line will fail with a RuntimeError, because # ``wrapper`` creates a ``wrap(coro)`` coroutine: foo() ``` See also [`get_coroutine_wrapper()`](#sys.get_coroutine_wrapper "sys.get_coroutine_wrapper"). 3\.5 新版功能: See [**PEP 492**](https://www.python.org/dev/peps/pep-0492) \[https://www.python.org/dev/peps/pep-0492\] for more details. 注解 This function has been added on a provisional basis (see [**PEP 411**](https://www.python.org/dev/peps/pep-0411) \[https://www.python.org/dev/peps/pep-0411\]for details.) Use it only for debugging purposes. 3\.7 版后已移除: The coroutine wrapper functionality has been deprecated, and will be removed in 3.8. See [bpo-32591](https://bugs.python.org/issue32591) \[https://bugs.python.org/issue32591\] for details. `sys.``_enablelegacywindowsfsencoding`()Changes the default filesystem encoding and errors mode to 'mbcs' and 'replace' respectively, for consistency with versions of Python prior to 3.6. This is equivalent to defining the [`PYTHONLEGACYWINDOWSFSENCODING`](../using/cmdline.xhtml#envvar-PYTHONLEGACYWINDOWSFSENCODING)environment variable before launching Python. [可用性](intro.xhtml#availability): Windows。 3\.6 新版功能: 有關更多詳細信息，請參閱 [**PEP 529**](https://www.python.org/dev/peps/pep-0529) \[https://www.python.org/dev/peps/pep-0529\]。 `sys.``stdin``sys.``stdout``sys.``stderr`[File objects](../glossary.xhtml#term-file-object) used by the interpreter for standard input, output and errors: - `stdin` is used for all interactive input (including calls to [`input()`](functions.xhtml#input "input")); - `stdout` is used for the output of [`print()`](functions.xhtml#print "print") and [expression](../glossary.xhtml#term-expression)statements and for the prompts of [`input()`](functions.xhtml#input "input"); - The interpreter's own prompts and its error messages go to `stderr`. These streams are regular [text files](../glossary.xhtml#term-text-file) like those returned by the [`open()`](functions.xhtml#open "open") function. Their parameters are chosen as follows: - The character encoding is platform-dependent. Non-Windows platforms use the locale encoding (see [`locale.getpreferredencoding()`](locale.xhtml#locale.getpreferredencoding "locale.getpreferredencoding")). On Windows, UTF-8 is used for the console device. Non-character devices such as disk files and pipes use the system locale encoding (i.e. the ANSI codepage). Non-console character devices such as NUL (i.e. where isatty() returns True) use the value of the console input and output codepages at startup, respectively for stdin and stdout/stderr. This defaults to the system locale encoding if the process is not initially attached to a console. The special behaviour of the console can be overridden by setting the environment variable PYTHONLEGACYWINDOWSSTDIO before starting Python. In that case, the console codepages are used as for any other character device. Under all platforms, you can override the character encoding by setting the [`PYTHONIOENCODING`](../using/cmdline.xhtml#envvar-PYTHONIOENCODING) environment variable before starting Python or by using the new [`-X`](../using/cmdline.xhtml#id5)`utf8` command line option and [`PYTHONUTF8`](../using/cmdline.xhtml#envvar-PYTHONUTF8) environment variable. However, for the Windows console, this only applies when [`PYTHONLEGACYWINDOWSSTDIO`](../using/cmdline.xhtml#envvar-PYTHONLEGACYWINDOWSSTDIO) is also set. - When interactive, `stdout` and `stderr` streams are line-buffered. Otherwise, they are block-buffered like regular text files. You can override this value with the [`-u`](../using/cmdline.xhtml#cmdoption-u) command-line option. 注解 To write or read binary data from/to the standard streams, use the underlying binary [`buffer`](io.xhtml#io.TextIOBase.buffer "io.TextIOBase.buffer") object. For example, to write bytes to [`stdout`](#sys.stdout "sys.stdout"), use `sys.stdout.buffer.write(b'abc')`. However, if you are writing a library (and do not control in which context its code will be executed), be aware that the standard streams may be replaced with file-like objects like [`io.StringIO`](io.xhtml#io.StringIO "io.StringIO") which do not support the `buffer` attribute. `sys.``__stdin__``sys.``__stdout__``sys.``__stderr__`These objects contain the original values of `stdin`, `stderr` and `stdout` at the start of the program. They are used during finalization, and could be useful to print to the actual standard stream no matter if the `sys.std*` object has been redirected. It can also be used to restore the actual files to known working file objects in case they have been overwritten with a broken object. However, the preferred way to do this is to explicitly save the previous stream before replacing it, and restore the saved object. 注解 Under some conditions `stdin`, `stdout` and `stderr` as well as the original values `__stdin__`, `__stdout__` and `__stderr__` can be `None`. It is usually the case for Windows GUI apps that aren't connected to a console and Python apps started with **pythonw**. `sys.``thread_info`A [struct sequence](../glossary.xhtml#term-struct-sequence) holding information about the thread implementation. 屬性 解釋 `name` Name of the thread implementation: > - `'nt'`: Windows threads > - `'pthread'`: POSIX threads > - `'solaris'`: Solaris threads `lock` Name of the lock implementation: > - `'semaphore'`: a lock uses a semaphore > - `'mutex+cond'`: a lock uses a mutex and a condition variable > - `None` if this information is unknown [`version`](#sys.version "sys.version") Name and version of the thread library. It is a string, or `None` if this information is unknown. 3\.3 新版功能. `sys.``tracebacklimit`When this variable is set to an integer value, it determines the maximum number of levels of traceback information printed when an unhandled exception occurs. The default is `1000`. When set to `0` or less, all traceback information is suppressed and only the exception type and value are printed. `sys.``version`A string containing the version number of the Python interpreter plus additional information on the build number and compiler used. This string is displayed when the interactive interpreter is started. Do not extract version information out of it, rather, use [`version_info`](#sys.version_info "sys.version_info") and the functions provided by the [`platform`](platform.xhtml#module-platform "platform: Retrieves as much platform identifying data as possible.") module. `sys.``api_version`The C API version for this interpreter. Programmers may find this useful when debugging version conflicts between Python and extension modules. `sys.``version_info`A tuple containing the five components of the version number: *major*, *minor*, *micro*, *releaselevel*, and *serial*. All values except *releaselevel* are integers; the release level is `'alpha'`, `'beta'`, `'candidate'`, or `'final'`. The `version_info` value corresponding to the Python version 2.0 is `(2, 0, 0, 'final', 0)`. The components can also be accessed by name, so `sys.version_info[0]` is equivalent to `sys.version_info.major`and so on. 在 3.1 版更改: Added named component attributes. `sys.``warnoptions`This is an implementation detail of the warnings framework; do not modify this value. Refer to the [`warnings`](warnings.xhtml#module-warnings "warnings: Issue warning messages and control their disposition.") module for more information on the warnings framework. `sys.``winver`The version number used to form registry keys on Windows platforms. This is stored as string resource 1000 in the Python DLL. The value is normally the first three characters of [`version`](#sys.version "sys.version"). It is provided in the [`sys`](#module-sys "sys: Access system-specific parameters and functions.")module for informational purposes; modifying this value has no effect on the registry keys used by Python. [可用性](intro.xhtml#availability): Windows。 `sys.``_xoptions`A dictionary of the various implementation-specific flags passed through the [`-X`](../using/cmdline.xhtml#id5) command-line option. Option names are either mapped to their values, if given explicitly, or to [`True`](constants.xhtml#True "True"). Example: ``` $ ./python -Xa=b -Xc Python 3.2a3+ (py3k, Oct 16 2010, 20:14:50) [GCC 4.4.3] on linux2 Type "help", "copyright", "credits" or "license" for more information. >>> import sys >>> sys._xoptions {'a': 'b', 'c': True} ``` **CPython implementation detail:** This is a CPython-specific way of accessing options passed through [`-X`](../using/cmdline.xhtml#id5). Other implementations may export them through other means, or not at all. 3\.2 新版功能. Citations [C99](#id1)ISO/IEC 9899:1999. "Programming languages -- C." A public draft of this standard is available at <http://www.open-std.org/jtc1/sc22/wg14/www/docs/n1256.pdf>. ### 導航 - [索引](../genindex.xhtml "總目錄") - [模塊](../py-modindex.xhtml "Python 模塊索引") | - [下一頁](sysconfig.xhtml "sysconfig --- Provide access to Python's configuration information") | - [上一頁](python.xhtml "Python運行時服務") | -  - [Python](https://www.python.org/) ? - zh\_CN 3.7.3 [文檔](../index.xhtml) ? - [Python 標準庫](index.xhtml) ? - [Python運行時服務](python.xhtml) ? - $('.inline-search').show(0); | ? [版權所有](../copyright.xhtml) 2001-2019, Python Software Foundation. Python 軟件基金會是一個非盈利組織。 [請捐助。](https://www.python.org/psf/donations/) 最后更新于 5月 21, 2019. [發現了問題](../bugs.xhtml)？ 使用[Sphinx](http://sphinx.pocoo.org/)1.8.4 創建。